2016年11月28日星期一
15 ton electric hoist tests
15 ton electric hoist tests
How to test the electric hoist?
Electric hoist testing is always required after installation. In today’s video, the 15 ton electric hoist has gone through various tests.
After inspection and preparation, the electric hoist operation test can proceed. The running test of electric hoist can be divided into the following three steps: no－load test, static load test, and movement test.
Electric hoist no-load tests
Electric hoist no-load test are mainly divided into the three parts, the electric hoist travelling test, crane travel test, and no-load hook test.
Electric hoist travel test
• Start the electric hoist of electric hoist
• Make the electric hoist run back and forth along the rail more than 3 times
• Test limit switch to make sure is sensitive and reliable.
• The driven wheels must touch rail all the time, the space between positive wheel and rail should be not more than 1mm.
Crane travel test
• Make the electric hoist run back and forth along the rail more than 3 times. Each time running distance is 3m at least.
• Wheels of the electric hoist must not stuck rail.
No-load hook test
• Lift the empty hook up and down more than 3times.
• Examine brake and lifting limiter.
• All traveling and lifting mechanism must work stable, no vibration and shock
Electric hoist static load tests
• Before Static load testing, the no-load test must be qualified.
• Set crane on one end of rail. Trolley/hoist lifts the rated capacity and travel along the crane girder back and forth.
• Unload the loads and set the trolley to one end of the crane girder.
• Hanging a plumb in middle of crane girder to examine the original bending degree. Operating trolley/hoist come to middle of girder, lifting loads 1.25times of rated capacity, up to 100mm, and keep this condition 10min on both sides of girder.
• Then examine the bending degree again.
• Then unload the capacity, to check if girder has any permanent change. This testing should do 3times.
• Then examine the final bending degree which should be bigger than 0.8L/1000.
• Place trolley/hoist stop in middle, lifting rated capacity to test girder’s resilience downwarping, which should not be more than L/700. For single girder electric hoist, the resilience downwarping should be not more than L/600.
Movement load tests
• Lift loads of 0.5 time, 0.7 time, 1 time and 1.1 times of rated capacity of the electric hoist.
• Make trolley/hoist travel several times.
• If no problem is observed, start crane traveling mechanism and run the electric hoist several times.
• Lifting mechanism must be operated 10-15min, traveling mechanism must work 20min or 10times.
• Ensure the brake is workable, reducer has no noise, no vibration, and temperature is normal, no oil leaking;
• Make sure the lubricating system is fine.
• Make sure all limiters and safety device are reliable.
• And electrical box is fine, temperature is normal, no noise, no vibration, cable/line connecting is not burnt.
Electric hoist is one of our main products. We can supply various Electric hoist for workshop. For more details, please contact us via info@nucleoncranegroup.com
- See more at: http://www.nucleoncranegroup.com
china nucleon crane group: How to operate EOT Crane?
china nucleon crane group: How to operate EOT Crane?: Europe Standard EOT crane operation method HD electric overhead crane Modern society, the demand of Europe Standard EOT crane is ...
How to operate EOT Crane?
Europe Standard EOT crane operation method
HD electric overhead crane
Modern society, the demand of Europe Standard EOT crane is more and more, especially in the current rapid development of science and technology, business is booming, the effect of crane is more prominent.But European crane as a kind of heavy machinery,should pay attention to safety, so what are the main place to pay attention ?See below.
Want to guarantee the safety of Europe Standard EOT crane, it is important to ensure that the crane’s performance is good, especially the crane use time is too long, before each use, all must check of various components in detail.Especially the jib crane, see whether its scale is in normal state,Whether the firm ,must not have the overload.And, then, is to check the oil, if found that there is lack of or no, to complement immediately, be sure to ensure the normal operation of mechanical energy.
NLH & BMHN electric hoist gantry crane
At the time of EOT crane operation,be careful not to hurt others.Because the crane is very heavy, action is not so convenience, as long as there is a little deviation is easy to hurt people around .When we were in the use of crane do not pass through man’s head, this may be the cause of objects fall off and cause casualties.Also can’t stand people below the crane arm, sometimes someone standing underneath the machine arm, slightly do not pay attention to, is likely to hit him.
Must follow the rules when operate European EOT crane , sometimes with interphone,sometimes is a command signal, can only be better listen to the command.Commanders in the outside can see the scene of the actual situation,operators and sometimes can not see as well.
- See more at: http://www.nucleoncranegroup.com
EOT Crane is one of our main products. We can supply various EOT Crane for workshop. For more details, please contact us via info@nucleoncranegroup.com
 |
| HD electric overhead crane |
Want to guarantee the safety of Europe Standard EOT crane, it is important to ensure that the crane’s performance is good, especially the crane use time is too long, before each use, all must check of various components in detail.Especially the jib crane, see whether its scale is in normal state,Whether the firm ,must not have the overload.And, then, is to check the oil, if found that there is lack of or no, to complement immediately, be sure to ensure the normal operation of mechanical energy.
 |
| NLH & BMHN electric hoist gantry crane |
Must follow the rules when operate European EOT crane , sometimes with interphone,sometimes is a command signal, can only be better listen to the command.Commanders in the outside can see the scene of the actual situation,operators and sometimes can not see as well.
- See more at: http://www.nucleoncranegroup.com
EOT Crane is one of our main products. We can supply various EOT Crane for workshop. For more details, please contact us via info@nucleoncranegroup.com
2016年11月21日星期一
What is bridge crane installation?
What is bridge crane installation?
The installation of bridge crane,Check deformation and damage for the metal structures and mechanical electrical equipment in the transport.And repair processes,and then assembled on the ground, and then to integral lifting.The main lifting equipment of this method is a hoist lifting mast and the ground winch.Do a rotation Angle for the bridge crane whole,with stable rope continue to ascend beyond altitude,Determine the direction,according to the determine location placed in orbit.
At the top of the mast must use a certain number of cable wind rope fixed,Cable wind rope strength and fixed method shall be calculated and tested.Set the cable wind rope shall not interfere bridge in rotation in the space.At the same time must be measured before installation and pick up from the centerline of the orbit to the lateral wall.Otherwise the bridge in space rotation will be affected.
This method of installation for lifting equipment capacity is big, but as a result of bridge crane assembly on the ground, so much less high, labor intensity is small, the installation cycle is short.
But some bridge crane due to plant pillars, roof and walls, such as the limitations of space position,cannot be used integral hoisting installation method , only the subsection hoisting method.Division hoisting method is to dispose of bridge beam connection apart, put each of the two main girder crane to orbit, put the car lift to higher than the height of girder position.Then put two main girder, together, will end beam connection, finally put the car into the car.This way of lifting altitude is difficult.
#Product bridge crane
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
Single Girder Overhead Crane
Single Girder Overhead Crane
LD Model Single Girder Overhead Crane
1. LD model single girder overhead crane (bridge crane) is has one main beam only.
2. This overhead crane (bridge crane) is characterized by more reasonable structure and higher strength steel as a whole, the main beam and end carriage are made by U-section steel plate.
3. This overhead crane (bridge crane) is used together with CD1/MD1 model or HC/HM model wire rope electric hoist as a complete set, the electric hoist is travelling under crane beam.
4. This overhead crane is medium duty class overhead crane, the capacity from 1ton to 20 tons. The span from 7.5m to 35m, the duty grade is A3-A4. Working temperature within -20 to +42 centigrade.
HD electric single girder overhead crane is our company has developed the word's advanced level single girder overhead crane product, this product with advanced technology, designed in accordance with international standard: DIN(Germany),FEM(European),ISO(International), with strong rigidity and light weight, outstanding design sturcture and other advantage, can save factory space and invest cost effectively, with the special traveling structure, is you best choice.
The product for use with ND type steel wire rope electric hoist, the rated lifting capacity 3.2t~16t, application to mechinery manufacture, metallurgy, petroleum, petrochemicals,ports,railway,civil aviation,electricitly,food, paper,building material, electronic ect industry workshops, warehouses and other materail handing application. Especaially for the applications that require precise positioning of the material handing, large parts and precision assembly, ans so on, the working temperture is -25-40℃.
- See more at: China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
LD Model Single Girder Overhead Crane
 |
| LD model single girder overhead crane |
1. LD model single girder overhead crane (bridge crane) is has one main beam only.
2. This overhead crane (bridge crane) is characterized by more reasonable structure and higher strength steel as a whole, the main beam and end carriage are made by U-section steel plate.
3. This overhead crane (bridge crane) is used together with CD1/MD1 model or HC/HM model wire rope electric hoist as a complete set, the electric hoist is travelling under crane beam.
4. This overhead crane is medium duty class overhead crane, the capacity from 1ton to 20 tons. The span from 7.5m to 35m, the duty grade is A3-A4. Working temperature within -20 to +42 centigrade.
 |
| HD single girder overhead crane |
The product for use with ND type steel wire rope electric hoist, the rated lifting capacity 3.2t~16t, application to mechinery manufacture, metallurgy, petroleum, petrochemicals,ports,railway,civil aviation,electricitly,food, paper,building material, electronic ect industry workshops, warehouses and other materail handing application. Especaially for the applications that require precise positioning of the material handing, large parts and precision assembly, ans so on, the working temperture is -25-40℃.
- See more at: China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
2016年11月20日星期日
Single Girder Overhead Crane-nucleon crane group
Single Girder Overhead Crane-nucleon crane group
1ton to 20ton LD Model Single Girder Overhead Crane - See more at: http://www.nucleoncranegroup.com
1ton to 20ton LD Model Single Girder Overhead Crane - See more at: http://www.nucleoncranegroup.com
Single Beam Gantry Crane-nucleon crane group
Single Beam Gantry Crane-nucleon crane group
MH model box frame Single Beam Gantry Crane is matched with wire rope electric hoist, it is a kind of track travelling medium-duty class gantry crane, the capacity from 3ton to 32ton, span from 12m to 35m, working temperature within-20--+40 centigrade. - See more at: http://www.nucleoncranegroup.com
MH model box frame Single Beam Gantry Crane is matched with wire rope electric hoist, it is a kind of track travelling medium-duty class gantry crane, the capacity from 3ton to 32ton, span from 12m to 35m, working temperature within-20--+40 centigrade. - See more at: http://www.nucleoncranegroup.com
2016年11月17日星期四
Gantry Crane Maintenance-nucleon crane group
Gantry Crane Maintenance-nucleon crane group
Gantry Crane Maintenance
Gantry Crane Maintenance
For gantry crane hoisting machinery equipment such as ,we need to repair as a top priority.This is because the repair link can not only exposed the insufficiency of gantry crane current and problem ,also can timely repair, change these shortcomings,so as to avoid more safety problems in the process of using.
For gantry crane maintenance, shall be carried out in a step.First of all is the maintenance personnel qualification confirmation: must be familiar with the performance of the gantry crane equipment,parameters, structure, action principle and corresponding maintenance skills
Second is concerning the management of overhaul scene: should be ruled out these factors that may affect the inspection result confirmed, such as electromagnetic field.
Finally is the equipment maintenance process: the gantry crane lubrication situation of the current and wire rope electric hoisting parts usage, electric control system and the corresponding electrical devices such as part of the performance of the actual performance condition, equipment, the operating condition of working mechanism, etc, through the use of actual test and comparison method to determine, and in the final confirmation Then according to the corresponding results to improve or repair, until sure no missing defects or problems exist, “overhaul” of gantry crane is completed.
- See more at: http://www.nucleoncranegroup.com
Rubber Tyred Gantry Crane Manufacturer-nucleon crane group
Rubber Tyred Gantry Crane Manufacturer-nucleon crane group
If the requirements are more than the above mentioned , we could specially design for you.
Rubber Tyred Gantry Crane Manufacturer
rubber tyred gantry crane manufacturer
Nucleon Rubber Tyred Gantry Crane Manufacturer Container Gantry Crane 45t is applicable to move, load and unload containers in rail station good yards, port, outside stores,etc. This type cranes use U frame, divedes into two types:
one is rail mounted gantry , the other is rubber tyre gantry crane . the clear space is bigger for containersmove to sides. The whole crane moves on the railsmounted in ground or moves on the ground directly, more fast, more steady. Power supply is cable drum. The whole work dutyis A6 and we can design non-standard according to your requirement.
Nucleon Rubber Tyred Gantry Crane Manufacturer Container Gantry Crane 45t is applicable to move, load and unload containers in rail station good yards, port, outside stores,etc. This type cranes use U frame, divedes into two types:
one is rail mounted gantry , the other is rubber tyre gantry crane . the clear space is bigger for containersmove to sides. The whole crane moves on the railsmounted in ground or moves on the ground directly, more fast, more steady. Power supply is cable drum. The whole work dutyis A6 and we can design non-standard according to your requirement.
If the requirements are more than the above mentioned , we could specially design for you.
Double welding box girder, DIN/FEM standard deflection
Steel tube legs
Material Fe37 or Fe52
Whole length CNC cutting for complete web plate, high deflection accuracy
High quality automatic welding and NDT inspection
- See more at: http://www.nucleoncranegroup.com/rubber-tyred-gantry-crane-manufacturer.html#sthash.G6BmFo2e.dpuf
Steel tube legs
Material Fe37 or Fe52
Whole length CNC cutting for complete web plate, high deflection accuracy
High quality automatic welding and NDT inspection
Design Of Jib Crane-nucleon crane group
Design Of Jib Crane-nucleon crane group
Features of jib crane
1. High quality 3 ton to 10 ton column mounted jib crane is suitable to work in the dock, warehouse, workshop etc fixed working conditions, it can work within the 360 degrees to lift, move and materials handling.
1. High quality 3 ton to 10 ton column mounted jib crane is suitable to work in the dock, warehouse, workshop etc fixed working conditions, it can work within the 360 degrees to lift, move and materials handling.
2 . This type machine with advantages of the simple structure, operate convenience, turning agile, wide working conditions.
3. The steel structure of high quality 3 ton to 10 ton column mounted jib crane is strong and built to last, optimized in design to reduce the stresses on your building. Your operators have good control over the load with stepless speed inverter control along the runway.
- See more at: http://www.nucleoncranegroup.com/design-of-jib-crane.html#sthash.v09lKmdG.dpuf
2016年11月16日星期三
Overhead Bridge Crane-nucleon crane group
Overhead Bridge Crane-nucleon crane group
#Product Overhead Bridge Crane
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/overhead-bridge-crane.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product Overhead Bridge Crane
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/overhead-bridge-crane.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
2016年11月15日星期二
Electric Hoist From China Nucleon Crane Group
1)CD/MD electric hoist
CD1 (MD1) type steel wire rope electric hoist is a small light lifting equipment, mainly under 0.5~16t, it can be installed in the hoist single girder, bridge cranes, gantry cranes, jibcrane. Analogous, also can be used for winch. Therefore, it is one of commom lifting equipment in factories, mines, ports, warehouses and freight yards and other material handling places, it is also the necessary machinery to improve labour efficiency, improve working conditions.
2)HC
HC is a large-tonnage hoist which on the basis of CD/MD electric hoist to be researched and developed of, rated capacity is 16~100t. performance is similar to CD/MD.
3)Europe electric hoist, ND type steel wire rope hoist according to Europe FEM standards, adopt the European standard FEM design development, concept advanced, attractive appearance, driving unitis Germany imported. the whole machine with compact and reasonable structure, simple operation and
convenient, safe and efficient operation, meet the requirements of modern low noise, energy saving and environmental protection .
The series electric hoist application 13 items patent technology, run frequency adjustable speed design, impact small, can achieved precise positioning; equipped with similar aircraft "black box" the intelligent security run monitoring records instrument, can continuously record crane work state information and prevent crane illegal operation; the whole machine used non-maintenance design, easy loss pieces less, maintenance convenient, General technology reached domestic and abroad similar products of advanced level.
ND type electric hoist according to installation can be divided into low construction height monorail trolley (ND-type, apply to single girder of electric single girder cranes), double girder crane(NDS type, suitable for double-beam crane) and stationary type . Single girder trolley electric hoist, standard weight is 1~12.5T, standard lifting height is 6m, 9m, 12m. Double raile trolley and fixed type , standard weight is 3.2~80t, with the auxiliary hook,the lifting capacity configuration is 10/3.2~80/20T , standard lifting height up to 18m. Running speed: 2~20m/min stepless frequency control, standard lifting speed is 5/0.8M/min and can also select the frequency, electric hoist, smooth braking, small crane swing, positioning accuracy, improved performance greatly. The electric hoist design basis working grade is M5.
This is Nucleon company‘s contact information,welcome to consult.
#Product Electric Hoist
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/europe-electric-hoist.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
 |
| CD Electric Hoist |
2)HC
 |
| Double rail electric hoist |
3)Europe electric hoist, ND type steel wire rope hoist according to Europe FEM standards, adopt the European standard FEM design development, concept advanced, attractive appearance, driving unitis Germany imported. the whole machine with compact and reasonable structure, simple operation and
 |
| ND Electric Hoist |
The series electric hoist application 13 items patent technology, run frequency adjustable speed design, impact small, can achieved precise positioning; equipped with similar aircraft "black box" the intelligent security run monitoring records instrument, can continuously record crane work state information and prevent crane illegal operation; the whole machine used non-maintenance design, easy loss pieces less, maintenance convenient, General technology reached domestic and abroad similar products of advanced level.
This is Nucleon company‘s contact information,welcome to consult.
#Product Electric Hoist
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/europe-electric-hoist.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
workshop crane-nucleon crane group
workshop crane-nucleon crane group
#Product workshop crane
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/workshop-crane.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product workshop crane
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/workshop-crane.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
Bridge crane maintenance-nucleon crane group
Bridge crane maintenance-nucleon crane group
#Product Bridge crane maintenance
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/bridge-crane-maintenance.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product Bridge crane maintenance
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/bridge-crane-maintenance.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
2016年11月14日星期一
Gantry Hoist
#Product Gantry Hoist
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
2016年11月11日星期五
EOT Crane Manufacturer-nucleon crane group
EOT Crane Manufacturer-nucleon crane group
#Product EOT Crane Manufacturer
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/eot-crane-manufacturer.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product EOT Crane Manufacturer
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/eot-crane-manufacturer.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
Rope Pulley Hoist-nucleon crane group
Rope Pulley Hoist-nucleon crane group
#Product Rope Pulley Hoist
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/rope-pulley-hoist.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product Rope Pulley Hoist
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/rope-pulley-hoist.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
hoist manufacturers-nucleon crane group
hoist manufacturers-nucleon crane group
#Product hoist manufacturers
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/hoist-manufacturers.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product hoist manufacturers
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/hoist-manufacturers.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
Bridge crane maintenance-nucleon crane group
Bridge crane maintenance-nucleon crane group
#Product Bridge crane maintenance
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/bridge-crane-maintenance.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product Bridge crane maintenance
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/bridge-crane-maintenance.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
2016年11月10日星期四
Overhead crane safety-nucleon crane group
Overhead crane safety-nucleon crane group
#Product Overhead crane safety
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/overhead-crane-safety.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product Overhead crane safety
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/overhead-crane-safety.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
Winch Drum-nucleon crane group
Winch Drum-nucleon crane group
#Product Winch Drum
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/winch-drum.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product Winch Drum
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/winch-drum.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
crane jib-nucleon crane group
crane jib-nucleon crane group
#Product crane jib
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/crane-jib.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product crane jib
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/crane-jib.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
Overhead Crane Parts Diagram-nucleon crane group
Overhead Crane Parts Diagram-nucleon crane group
#Product Overhead Crane Parts Diagram
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/overhead-crane-parts-diagram.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product Overhead Crane Parts Diagram
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/overhead-crane-parts-diagram.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
2016年11月9日星期三
Bridge Crane Parts-nucleon crane group
Bridge Crane Parts-nucleon crane group
#Product Bridge Crane Parts
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/bridge-crane-parts.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product Bridge Crane Parts
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/bridge-crane-parts.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
Construction Crane-nucleon crane group
Construction Crane-nucleon crane group
#Product Construction Crane
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product Construction Crane
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
Eot Crane Specification-nucleon crane group
Eot Crane Specification-nucleon crane group
#Product Eot Crane Specification
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/eot-crane-specification.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product Eot Crane Specification
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/eot-crane-specification.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
Bridge Crane-nucleon crane group
Bridge Crane-nucleon crane group
#Product Bridge Crane
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/bridge-crane.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product Bridge Crane
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/bridge-crane.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
2016年11月8日星期二
Material Handling Roof Hoist Systems
Material Handling Roof Hoist Systems
Wire rope electric hoist system is a lifting equipment which widely used and necessary in Industry, it can be installed on single girder overhead crane, single girder gantry crane, jib crane and I-beam. According to different design principles and using environments, Electric hoist also divide into single speed (CD electric hoist), double speed(MD Electric hoist), square box(HC electric hoist) and curve traveling hoist(CDW electric hoist), anti-explosion type, metallurgical type, Europe type and Low headroom type, etc. What’s more, the electric hoist also can be designed to pendent control and wireless remote control.The low headroom wire rope electric hoist is improved from CD & MD type electric hoist, the working condition same as CD & MD type wire rope electric hoist, but it increases more clean lifting space, you can save more construction cost of workshop.
Nucleon Crane located in Henan Crane Industrial Park, which has good raputition by “Town of China Crane” which is in Changyuan county,xinxiang city,henan province,China.Include overhead crane, gantry crane,electric winch, coal series hoisting equipment, small light lifting equipment and other products of research and development, manufacture, installation, sales and service as one of the Sino-foreign joint ventures.We provide high quality products and after-sales service!And already awarded ISO9001 Certificate of Quality System,ISO14001 Environmental Management SystemandOHSAS18001 Occupation Health and Safety Management System Certification.This is our company‘s contact information,welcome to consult.
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/eot-crane-specification.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
 |
| ND Model Electric Hoist |
 |
| CD Model Electric Hoist |
 |
| China Nucleon Crane Group |
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/eot-crane-specification.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
Bridge Crane Manufacturer-nucleon crane group
Bridge Crane Manufacturer-nucleon crane group #Product Bridge Crane Manufacturer
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/bridge-crane-manufacturer.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/bridge-crane-manufacturer.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
2016年11月7日星期一
EOT Crane manufacturer
#Product EOT Crane
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/eot-crane.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
2016年11月6日星期日
Gantry Crane Catalogue-nucleon crane group
Gantry Crane Catalogue-nucleon crane group
#Product Gantry Crane Catalogue
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/gantry-crane-catalogue.htm
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Product Gantry Crane Catalogue
China Nucleon Crane Group
#Web http://www.nucleoncranegroup.com/gantry-crane-catalogue.htm
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
2016年11月1日星期二
1 ton to 20 ton LD model Single Girder Bridge Crane
1 ton to 20 ton LD model Single Girder Bridge Crane:
1. LD model single girder bridge crane is has one main beam only.
2. This bridge crane is characterized by more reasonable structure and higher strength steel as a whole, the main beam and end carriage are made by U-section steel plate.
3. This bridge crane is used together with CD1/MD1 model or HC/HM model wire rope electric hoist as a complete set, the electric hoist is travelling under crane beam.
4. This bridge crane is medium duty class overhead crane, the capacity from 1ton to 20 tons. The span from 7.5m to 35m, the duty grade is A3-A4. Working temperature within -20 to +42 centigrade.
5. This bridge crane is widely used in plants, warehouses, material stocks to lift goods. It is prohibited to use the equipmenmt in the combustible, explosive to corrosives environment.
订阅：
博文 (Atom)