EOT Crane manufacturer matters needing attention：
1)In the maintenance of crane, remove and check hook axis, horizontal single girder bridge crane, pulley, bearing and cleaning lubrication,the hook of crack can not exist, or according to the rules to deal with.
2)Check the dangerous section and wear condition, when the wear degree is more than 10% of the original height, as scrap,Replace the processing.
3)After overhaul to test hook, with 1.25 times rated load of suspended more than 10 minutes, hook elastic open mouth is not higher than 0.25% of the original size, and no deformation, crack after download.
4)After the board hook riveting, the clearance between the plate and not more than 0.3 mm
2)Check the dangerous section and wear condition, when the wear degree is more than 10% of the original height, as scrap,Replace the processing.
3)After overhaul to test hook, with 1.25 times rated load of suspended more than 10 minutes, hook elastic open mouth is not higher than 0.25% of the original size, and no deformation, crack after download.
4)After the board hook riveting, the clearance between the plate and not more than 0.3 mm
Nucleon located in Henan Crane Industrial Park, which has good raputition by “Town of China Crane” which is in Changyuan County of China.Is a overhead crane, gantry crane,EOT Crane manufacturer, installation, sales and service as one of the Sino-foreign joint ventures.We provide high quality products and after-sales service!And already awarded ISO9001 Certificate of Quality System,ISO14001 Environmental Management SystemandOHSAS18001 Occupation Health and Safety Management System Certification.This is our company‘s contact information,welcome to consult.
#Web http://www.nucleoncranegroup.com/eot-crane.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
#Web http://www.nucleoncranegroup.com/eot-crane.html
#Contact Skype:nucleoncranegroup OR Email:info@nucleoncranegroup.com
没有评论:
发表评论